Nakamichi Soundbar is one of the popular soundbar models that has a unique audience around the USA and Japan. Being a top-selling brand, they never compromise with the audio performance and audio driver. On the other side, due to unexpected software issues, your Nakamichi Soundbar might show some not working and other performance issues. However, you can easily fix this by performing the soft or hard reset steps on your Nakamichi Soundbar.
Since there is no reset button on the Nakamichi Soundbar, the process of performing a factory reset is quite a puzzle. However, it can be easily done with your soundbar’s remote control. If you’re unaware of how to reset the Nakamichi Soundbar, then learn the process from my writings.
Why You Should Reset the Nakamichi Soundbar?
By resetting, you can clean out any bugs or unwanted memory on your Nakamichi Soundbar for good. You can do the reset process when you face,
- The soundbar is not connecting to external devices.
- The subwoofer is not working in sync with the Nakamichi soundbar.
- Software-related issues.
- Connectivity issues.
How to Soft Reset Nakamichi Soundbar
Before doing a hard reset, I recommend you perform a soft reset (power cycle) on your Nakamichi Soundbar to fix any minor issues. By doing this, you can clear out any minor glitches and fix any issues that are not working with your Nakamichi soundbar within minutes.
1. Turn off your TV or other streaming device, including your soundbar device.
2. Pull out the power cables and the source cables from the TV and the soundbar.
3. Let both devices idle for 5 minutes.
4. Now, connect the power cables of the soundbar to the TV and turn on both devices.
5. After turning it on, connect your source devices to the TV one by one.
6. Now, test out the soundbar and check whether your issue is solved or not.
How to Hard Reset Nakamichi Soundbar
If the soft reset of the soundbar goes into a vein, then follow the ultimate hard reset process to fix this issue.
1. Turn on your Nakamichi Soundbar using your remote control and press the Arc button on the remote.
2. Next, press the Movie button on the soundbar remote to put your soundbar in Movie mode.
3. Now, tap on the Setup button on the remote multiple times until you see the RESET message displayed on the soundbar.
4. Press the Enter button on your remote once to start the reset process.
5. If you see the Yes message on the soundbar, then press the Enter button again to finish the firmware reset process on your Nakamichi Soundbar.
6. Once the reset is done, the soundbar will restart automatically and go to the Arc mode.
7. Now, pair your Nakamichi soundbar to your TV again and check whether your issue is solved or not.
Contact Nakamichi Customer Support
Even if resetting your soundbar doesn’t resolve your issue, it’s better to call out Nakamichi’s technical support to fix it. You can contact the customer support of the service by visiting their official website.
FAQ
To fix the Arc not working issue on your Nakamichi Soundbar, check whether the HDMI cables are connected firmly. Or do a soft or hard reset on your soundbar to fix this issue.
Yes, if your Nakamichi soundbar remote is not working properly, you can initiate a soft reset on your Nakamichi soundbar to remove errors without using an actual remote control.